Deluxe Acoustic guitar pickguard 2mm thick celluloid abalone inlay Hummingbird

Description

Buyer Note:
[With a high-viscosity double-sided tape on the back, you can just peel it off and paste it.
Please align it and paste it. It’s hard to peel off after pasting it]
[Protection board material]: Imported 0.8mm thickness celluloid board and then sealed with soft glue. The thickness after sealing with soft glue is about 1.5mm-2.0mm. Generally speaking, it will not affect the resonance and will not affect the tone. Of course If some customers feel that there is a subtle impact, it is a matter of opinion. After all, Gibson GIBSON is also a patient with obsessive-compulsive disorder who wears this kind of thick protective plate. It is also necessary to remind that the production workshop is not a completely dust-free workshop for the time being. There will inevitably be some small blisters during the sealing process, but it is not obvious that I want to be considerate of the real shells that are sealed inside and will not fall off. The pattern is firmly locked inside. It should be noted that the shells are natural and may have a little pit. We will try our best to deal with the cracks to ensure the overall beauty and peace of mind! ! But you can’t pick faults either. Perfectionists remember to shoot carefully.
[Usage method and precautions]: Please wipe the dust on the surface of the guitar with a piano cloth, dry wipe or clean it up with alcohol (the Gibson guitar is nitrocellulose paint, do not use alcohol!!!) Wait until the alcohol evaporates cleanly If the old guard plate is torn off and there is residual glue, you can also use alcohol or other thinner to clean it up and then paste it. It should be noted that if the guitar surface has been treated, polished, waxed oil, etc., the guitar panel will have lubricating oil and not dry. As a result, the glue viscosity will decrease, and the guard plate will not stick stable. You need to pay attention to it. After attaching, press the edge firmly. Try not to play it immediately for a day or two. Let the guard plate fully fit the guitar panel. You can also use some items such as books and the like. Put it on top to assist the guard plate is made of soft rubber, but also pay attention to the temperature. Overheated and cold weather temperature will make the guard plate warp and deform. Try to put it in a ventilated place. If the edge warping is normal, you can add a small amount of liquid glue by yourself. For example, B-7000 uses a small piece of paper to drop a small amount of glue on it and put it into the gap between the guard plate and the guitar. This will make it more uniform, and then take the small piece of paper out.
[Guard plate size]: inner diameter 116.2mm
FEEDBACK
Every
piece of feedback is what drives us forward.It is true love of you.
(A)
If
you are satisfied with your purchase, we sincerely hope that you will give us a positive feedback.
And
we
’
ll
give you
a
positive feedbac
k in return.
(B) If you are dissatisfied with your purchase, please contact us prior to submitting a neutral or negative feedback.
We will respond to you within 24 hours and work with you until you are satisfied.
Many thanks for this.
Best wishes for a nice day.