Garrard 301 and 401 Rebuild Service

Description

Hello. My name is James Campbell. Some of you know me for my Thorens TD-124 rebuild service that I have offered over the past 12 years. During this period I was contacted many times by Garrard 301 and 401 owners who wanted to know if I also rebuilt these tables. I have done quite a few over the years, references upon request, so I have decide to make a listing for this service. The work performed will be as follows:
1) Complete disassembly and cleaning of all parts using ultra sonics, tumblers, and just plain old elbow grease. Cadmium plating can be removed and new gold zinc applied at customer request. Additional cost applies.
2) Complete motor disassembly, new oil retention felts, purge old oil out of sintered bronze bushings and re-impregnate with new oil using a vacuum pump. New bushings can be installed if needed at cost.
3) New nuts bolts and washers as needed.
4) new springs as needed
5) New suppressor
6) True idler wheel  and new idler bushings if needed at additional cost
7) New face plates if requested. This will be at additional cost.
8) Polish eddy brake
9) 3 step 3M paint polish
10) Clean and revitalize mat.
Slate plinths and wood plinths can also be supplied, Thank you for looking.