SPECIAL OFFER - NEW HVY DUTY BLADE WRENCH with FREE WRENCH HANGER - Unisaw

Description

OVER
700
OF THESE VERY POPULAR HEAVY DUTY BLADE WRENCHES HAVE BEEN SOLD.
This is a new improved blade wrench specifically designed for the arbor nut on a Delta UNISAW.  The wrench fits many other saw arbor nuts as well, that utilize a 7/8" outside flat to flat dimensioned nut to retain the blade.
-------------------------------------------------------------------------------
SPECIAL PROMOTION
Buy a wrench and get a .00 value "no drill" nifty little wrench hanger FREE.
------------------------------------------------------------------
Most people would wonder how can you improve on such a simple device as the blade wrench.
However, we have....
This wrench is laser cut from
.
178" thick cold roll steel as compared to the
.
136" thick stamped steel wrench provided as OEM Delta equipment.  This 30% heavier plate thickness provides increased surface contact for better bearing on the faces of the arbor nut.
The stock OEM blade wrench is 8
.
25" in length. This wrench is 9
.
50", or 15% longer for increased leverage.
The handle on an OEM wrench is tapered, allowing for a marginal grip on the shank of the wrench.  Our wrench has added profiling of finger grooves near the top to enable the wrench to nest easily in one's hand when removing or snug-tightening the arbor nut.
Stock wrenches come with little or no surface finish.  Our wrench has been deburred, sandblasted,  powdercoated,  and oven-baked in a high visibility red corrosion resistant plastic finish.
In addition, our wrench incorporates a hole at the end of the handle for conveniently hanging the wrench for storage.
The wrench head has been bent in a precision press brake to produce an 11 degree offset to keep your fingers and knuckles clear of the saw blade's teeth when tugging on the arbor nut.
Not everyone needs a "special" hook as a place to hang their saw wrench, but we are now offering a neat little wrench hanger for
free
with each of the wrenches purchased from our latest production run.
The wrench hanger requires no drilling of your UNISAW.  It is installed by simply replacing either the left or right hand corner bolt that holds the saw table top to the cabinet with our custom manufactured 7/16 - 20 fine thread bolt and stainless steel swivel hook.  Check out this auction's photo of the hanging wrench....note the out-of-the-way positioning, but still the close-at-hand convenience, of where the wrench is located.
This wrench hanger provides a close-by, non-obtrusive, highly visible site to keep your easily misplaced blade wrench.  We also included a photo on this auction site of the swivel hook hanger weldment by itself so you can see just what we are talking about.
We are offering this regularly priced .00 wrench hanger
FREE
as a limited time promotion to those who purchase from our latest production run of this very popular blade wrench
.
Shipping to anywhere in the lower 48 states is an additional .00.
Shipping to other locations will be quoted based on zip code and US postal rates.
Payment by PayPal is preferred.